Zhuzhou ruili tools CO.,LTD.
Zhuzhou Ruili Tools Co.,Ltd Forge ahead to pursue excellence;benefit the society to build the last
Add to Cart
Pure Tungsten Carbide Sheet , Carbide Wear Plate Corrosion Resistance
We save you more that solves Ruili better
Applications
Carbide plate is a highly efficient and green material, which features qualities of stainless steel: Corrosion resistance, oxidation resistance, wear resistance, bonding proof and acid-base resistance; And ensures its good strength, toughness, bending and stretching, impact resistance.
Tungsten carbide strip is used for woodworking cast iron cutting tool. It can be used in many field such as woodworking, machining of refractory alloys, stainless steel, high manganese steel, for processing cast iron, non-ferrous metal and aluminum section bar, etc
Advantage:
1. Factory direct price with excellent quality, fast delivery and satisfactory service
2. OEM & ODM service is available
3. 100% tungsten carbide material
4. Strictly quality control system
5. Advanced production equipment and quality test equipment
6. Quick response:Your Enquiry will be replied within 24 hours.
7. Flexibility:Small orders are acceptable for quick delivery and to help you reduce stock cost
Tungsten Carbide - Main Property:
1. Excellent Hardness: 86~93 HRA, which equal to 68~81HRC;
2. Excellent hot working performance: Hardness could be remained at 60 HRC under 900~1000 ℃
3. Excellent wear resistance;
4. High cutting speed;
5. Long service life
Grade & Application of Carbide Wear Plate
| ISO Code | Grand | Physical and mechanical properties | Applications recommended | ||
| Density g/cm3 | Hardness No Less Than HRA(HV) | TRS No Less Than (Mpa) | |||
| K05 | YG3 | 15 | 90.5 | 1300 | Suitable for finishing of cast iron and nonferrous metal. |
| K10 | YG6X | 14.8 | 91 | 1560 | The finishing& semi-finishing of cast iron and nonferrous metals and also for the machining of manganese stell and hardening steel. |
| YG6A | 14.7 | 91.5 | 1510 | ||
| K15 | YG6 | 14.9 | 89.5 | 1670 | Suitable for the roughing of cast iron and light alloys and also for the milling of cast iron and low-alloy steel. |
| K20 | YG8 | 14.6 | 89 | 1840 | Suitable for the roughing of cast iron and light alloys and also for the milling of cast iron and low-alloy steel. |
| M10 | YW1 | 13 | 91 | 1290 | Suitable for finishing and semi-finishing of stainless steel and conventional alloy steel |
| YW3 | 12.9 | 92 | 1390 | ||
| YW4 | 12.3 | 92 | 1390 | ||
| M20 | YW2 | 12.9 | 90.5 | 1460 | The grade can be used for the semi-finishing of stainless steel and low-alloy steel and it is mainly used for the maching of railway wheel hubs. |
| P10 | YT05 | 12.6 | 92.5 | 1260 | Suitable for the finihing and semi-finishing if steel and cast steel with a moderate feed rate and a rather high cutting speed. |
| YT15 | 11.3 | 91 | 1300 | ||
| P20 | YS14 | 11.4 | 91.5 | 1550 | Suitable for the finishing and semi-finishing of steel and cast steel. YS25 is specially used for the milling of steel and cast steel. |
| YT14 | 11.4 | 90.5 | 1400 | ||
| YS25 | 13 | 90.5 | 1780 | ||
| P30 | YT5 | 12.8 | 89.5 | 1560 | Suitable for the heavy duty rough tuming of steel and cast steel with a big feed rate at a medium and low speed under unfavorable working conditions. |
| K05-K10/M20 | YT26 | 14 | 92.5 | 1600 | Suitable for fine and semi-finishing machining of chilled cast iron and non ferrous metals with good performances of the mosetting and wear resistance, also suitable for turning and milling of manganese steel and hardened steel. |
| K20 | YD201 | 14.9 | 91 | 1800 | Suitable for semi-finishing and the rouhhing of cast iron and light alloys ans also for the milling of cast iron ans low alloy steel. |
| M05-M10 | YS8 | 13.9 | 92.5 | 1720 | It can be used for the finishing of iron based ans nickel based high -temperature alloys and high -strength steel and it can also be used for the finishing if chilledcast iron, heat resistant stainless steel, high manganese steel resistant stainless steel, high manganese steel and hardened steel. |
| M10 | 60 | 12.8 | 92.5 | 1500 | Mainly used for threading of petroleum pipe, also used for fine machining of hardened steel. |
| M20 | YM20 | 13 | 91 | 1750 | |
| P30 | YC30S | 12.9 | 90 | 1600 | Used for the milling of steel, cast steel ans alloy steel. |
| P35-P40 | YC40 | 12.9 | 91 | 2200 | Suitable for the heavy duty turning of steel and cast steel with a big steel rate under unfavorable working condifion. |
| P40 | YM40 | 12.75 | 90 | 2100 | Suitable for the heavy duty turning of steel and cast steel with a big steel with a big steel rate and also for face milling. |
| YC45 | 12.75 | 90 | 2300 | ||
Customer NOTICE:
To save your value time, please inform us of the following information:
1, Grade
2, Type
3, Dimension for each type
4, Blanks or finished products
5, If you have any special requirements of the products, pls send us in advance. We will satisfy you as much as we can.
