Zhuzhou ruili tools CO.,LTD.
Zhuzhou Ruili Tools Co.,Ltd Forge ahead to pursue excellence;benefit the society to build the last
Add to Cart
K20 / K30 Tungsten Carbide Blanks Used To Make Carbide Woodworking Tools
Applications:
Cemented Carbide Strips/bars Specification:
The Grade & Application Information of Tungsten Carbide Plate
2. Descriptions of Product
| GRADE | DENSITY g/cm3 | TYPICAL VALUE | APPLICATION SCOPE | |
| HARDNESS | BENDING STRENGTH | |||
| YG3 | 15.10~15.30 | 92.5 | 1700 | Superior wear resistance only less than YG3X, sensitive to impact and vibration, suitable for cast non-ferrous metal and its alloy finish turning, semi-finish turning, thread finish turning and hole expanding. |
| YG3X | 15.10~15.30 | 93.6 | 1450 | Best wear resistance in Tungeten and Cobalt alooy, but not good in anti-impact proprety, suitable for cast iron, non-ferrous and alloy, quenched steel, alloy steel small cutting section machining at high speed. |
| YG6X | 14.80~15.00 | 92.4 | 2000 | Belong to small granule Tungsten carbide alloy, wear resistance higher than YG6. Suitable for machining cold and hard alloy cast iron and heat resistance alloy steel, as well as finish machiing for normal cast iron. |
| YG6 | 14.80~15.00 | 91.1 | 2100 | High wear resistance but less than YG3, better anti-impact and anti-vibration than YG3X, Suitable for cast iron, non-ferrous and alloy, non-metal material semi-finish machining and finish machining. |
| YG6A | 14.8~15.00 | 92.8 | 1850 | Belong to small granule alloy, wear resistance hig, suitable for semi-finish machining of cold and hard cast iron, non-ferrous and alloy, as well as semi-finish machining and finish machining for quenched steel, alloy steel |
| YG8 | 14.6~14.80 | 90.5 | 2300 | High bending strength resistance, better anti-impact and anti-vibration than YG6, suitable for cast iron, non-ferrous and alloy, non-metal material rough machining at low speed. |
