High Hardness YG6 Carbide Square Bar Custom Made Sintered Surface For Wear Parts
Desctription of YG6 Carbide Square Bar/Plate/Strips:
Tungsten steel plate is made of WC-tungsten carbide and Co-cobalt powder by using metallurgy method, such as power process, ball-milling, pressing and sintering.The main alloy component are WC and Co. Different uses of tungsten steel plate contain different content of WC and Co. Its application is used widely.
Material of YG6 Carbide Square Bar/Plate/Strips:
Tungsten steel plate is mainly made of Tungsten steel(cemented carbide/ hard alloy) and some great metal. It’s made by power metallurgy method. This great tungsten steel is widely used in various kinds production and processing field.
Tungsten steel material is high hardness, high strength, wear-resistant, heat resistant, corrosion resistance, good toughness, etc.
Especially its high hardness & wear-resistant can keep even in the high temperature of 500℃. The tungsten steel still can keep high hardness even in the high temperate of 1000℃.
Feature of YG6 Carbide Square Bar/Plate/Strips:
1. With excellent red hardness
Red hardness means tungsten steel plate can keep its hardness under a certain temperature after some times.
2. High hardness
3. Wear-resistant
4. High elastic modulus
5. High compressive strength
6. High chemical resistance(such as acid-resistance, alkali-resistance, and heat-oxidation resistant)
7. Lower impact toughness
8. Low expansion parameter, heat-conducting property and electrical conductivity is similar with the ferroalloy.
Application of YG6 Carbide Square Bar/Plate/Strips::
Tungsten steel plate is mainly used for producing various kinds of metal & non-metal cutting tools, such as hard accessories, mold parts, machine tool components,high-speed punching die, Multi-station progressive die, cutting copper, aluminium, stainless steel,cold-rolled sheet, EI sheet, Q195, SPCC, silicon steel sheet, hardware accessories, standard component, upper & lower punch, etc
It also can make heat-resistant parts, wear-resistant parts, shielding-resistant parts, corrosion resistance parts,etc
Parameter of YG6 Carbide Square Bar/Plate/Strips:
Length * Width * Thickness
| Size(mm)
L*W*T | Tolerance(mm) | Fine-blanked
|
| Blank |
| Length | Width | Thickness |
| 100×100×(1.0~70) | ±2.2 | ±2.2 | ±0.5 | ±0.01 |
| 105×105×(1.0~70) | ±2.2 | ±2.2 | ±0.5 | ±0.01 |
| 150×150×(5.0~70) | ±2.2 | ±2.2 | ±0.5 | ±0.01 |
| 200×200×(5.0~70) | ±2.2 | ±2.2 | ±0.5 | ±0.01 |
Order of YG6 Carbide Square Bar/Plate/Strips::
When in ordering, please state following information:
1. Length
2. Width
3. Thickness
4. Such as(100×100×2mm L*W*T)
Picture Show of YG6 Carbide Square Bar/Plate/Strips and other tungsten carbide products:
